SkyScan Atomic Clock Model 28700 Manual

Model 28700

RADIO CONTROLLED ANALOG CLOCK WITH Temperature & Date LCD 

 

Model 28700 Instruction manual    

Introduction:Congratulations on purchasing this Analog Clock featuring WWVB radio controlled time with daylight saving time function, indoor temperature and calendar display. The operation of this product is simple and straightforward but please read this instruction manual to ensure that you have the full benefits of all its features. Features:·             WWVB radio control time with manual time setting option·             4 time zones : Pacific Time (PT), Mountain Time (MT), Central Time (CT) and Eastern Time (ET).·             Indoor temperature in degrees Fahrenheit (°F) or Celsius (°C) (User selectable)·             Calendar display·             Indoor temperature  Specifications:Indoor Temperature measuring range : -4°F to +140°F (-20°C to +60°C)Indoor Temperature checking interval : every 15 seconds Power Supply:Analog Clock : 1 x AA, IEC LR6, 1.5V batteryLCD Thermo-Hygro Weather Monitor : 2 x AAA, IEC LR3, 1.5V batteryBattery life cycle : approximately 12 months (Alkaline batteries recommended) Dimensions:Analog Clock (ø x W)  :               13.0" x 1.7" (330 x 42.5 mm) 

The Digital Temperature and date LCD

 Setting up of the temp and date LCD:The temperature LCD uses 2 x AAA, IEC LR3, 1.5V batteries. To install and replace the batteries, please follow the steps below:

+ key

SET key

Battery compartment

            
1. Lift the center of the battery compartment and remove the cover.2. Insert the batteries, observing the correct polarization.3. Replace the battery cover on the unit.After a few seconds, the LCD screen starts to display indoor temperature and the date. 

Function Keys

SET key:·            Press and hold to enter the set mode for the following functions: Display Language (English or Spanish), °C/°F settings, 12/24 hour format,  Manual time, Year, Month and  Date + key ·            Press To make adjustment for various settings·            In normal display, press to toggle between the display of "Weekday + date", "Indoor temp + date" and "Weekday + date" in the LCD  Manual settingS:The following manual settings can be done in the setting mode:·          Display Language (English or Spanish)·          °C/ °F setting ·          12/ 24 hr time format·          Manual time setting·          Calendar setting Press and hold the SET key for about 3 seconds to advance to the setting mode: Display Language (English or Spanish) 

flashing

      
The default language of display is set English (US). To select Spanish ('E")°C:1.        The "US" will be flashing, use the + key to toggle between "US" (English) and "S" (Spanish).2.        Once the desired language has been chosen, confirm with the SET to advance to the         °F/°C hr time format. 

°F/°C TEMPERATURE unit SETTING

 

flashing

      
The default temperature reading is set to °F (Fahrenheit). To select °C (Celsius):3.        The "°F/ °C" will be flashing, use the + key to toggle between "°F" and "°C".4.        Once the desired temperature unit has been chosen, confirm with the SET to advance to the         12/ 24 hr time format. 12/ 24 hr time format

flashing

     
The time display can be selected to show hours in 12-hour or 24-hour settings. (Default 12-Hour)1.     Press the + key to toggle between "12H" or "24H".2.     Confirm with the SET key and enter the Manual time setting. MANUAL TIME SETTING

Hours (flashing)

Minutes (flashing)

     
To set the clock:1.        The hour digits start flashing in the time display section.2.        Use the + key to adjust the hours and then press SET key to go to the minute setting.3.        The minute will be flashing. Press the + key to just the minutes.  4.        Confirm with the SET key and enter the "Calendar Setting". Calendar setting

"Month/ Date" - when 12 hour time is chosen; "Date/ Month" - when 24 hour time is chosen.

  

Year

      
The date default of the clock is 1. 1. of the year 2006 after initial set-up. To set the date:1.        Using the + key, set the year required. The range runs from 2006 to 2036 (default is 2006).2.        Press the SET key to enter the month setting mode.3.        The month digit will be flashing. Press the + key to set the month and then press the SET key to go to the day setting. 4.        The day digit will be flashing. Press the + key to set the day.5.        Confirm with the SET and return to the normal display. Note: The weekday will be automically set. In normal display, the time will not be shown.  To view the different mode in the LCD.In normal display, user may press the + key to toggle between the display of "Weekday + date", "Indoor temp + date" and "Weekday + indoor temp" in the LCD:

Weekday

Date

Temperature

            
The Analog Clock: Note: The Analog clock and the Temp and date LCD works independetly.

A

MANUAL SET BUTTON will turn offWWVB reception!

       
                                                                                

Battery compartment

        

Quick set-up instructions

·          Install 1 fresh AA, LR6 1.5 volt ALKALINE battery.  ·          Press a "PT", "MT", "CT", or "ET" button to select a time zone.  Do not press the MANUAL TIME SET button while the clock is at the 4:00, 8:00, or 12:00 position (searching for the WWVB signal).  THAT'S IT! During the night your clock will automatically set itself.  For a better understanding of how and why your clock works, please continue reading. Nothing is more precisely measured than time! And nothing keeps track of time more precisely and trouble-free than Skyscan radio controlled clocks. Since the beginning of time, man has been fascinated with the measurement of time and has devised accurate machines to trap and measure time. Today, time is precisely measured in the United States by the most accurate clock in North America, the Atomic Clock of the US National Institute of Standards and Technology, Time and Frequency Division in Boulder, Colorado. A team of atomic physicists continually measures every second of every day to an accuracy of ten billionths of a second per day. These physicists have created an international standard, measuring a second as 9,192,631,770 vibrations of a Cesium 133 atom in a vacuum. This atomic clock regulates the WWVB radio transmitter located in Fort Collins, Colorado, where the exact time signal is continuously broadcast throughout the United States at 60 kHz to take advantage of stable long wave radio paths found in that frequency range. Radio waves at these low frequencies use the earth and the ionosphere as a wave-guide and follow the curvature of the earth for long distances. The built-in antenna system will receive the WWVB signal anywhere in North America within 2000 miles of Fort Collins where long-wave radio reception is undisturbed. A microprocessor activates the receiver and processes the time signal from Fort Collins overnight. Through the radio signals, Skyscan radio controlled clocks always keep precise time. The changeover from standard time to daylight savings time, and vice versa, takes place automatically with the same precision.  

Eastern Time

Pacific Time

Mountain Time

Central Time

MANUAL TIME SET BUTTON**ONLY use in areas with No WWVB reception

Daylight Saving Time (DST) ON/OFF Button

MANUAL SET BUTTON will turn offWWVB reception!

A

                     

Additional details

To set up your clock simply install one fresh AA, LR6 ALKALINE battery. Due to the nature of long wave radio signals, it is normally not possible to receive a signal during the day so it is best to install the battery late in the evening. Select your time zone by pressing one of the four time zone buttons PT-Pacific Time, MT-Mountain Time, CT-Central Time, ET-Eastern Time. The time zone buttons may be pressed any time after installing the batteries. If multiple buttons are pressed the clock will set to the time zone selected last. If no time zone is selected the clock will default to Pacific Time. Another time zone can be selected before or after the clock has set itself. Your clock can only set itself to one of the four time zones stated above. For time zones outside of PT, MT, CT or ET you must manually set the time using the Manual Time set button on the back of the movement. When the battery is installed the hands will move to the 4:00, 8:00, or 12:00 o'clock position.  The clock is now searching for a signal.  For the initial setting it is recommended to stand the clock in an upright position near a window facing Colorado. Within five minutes the clock will either receive the WWVB signal and set itself to the exact time, or it will determine that the signal is not receivable at its current location and search for WWVB each hour until a signal is received.  Select a location to place your radio controlled clock where it will be at least six feet away from a TV, computer, air conditioner or other household electrical appliances. The optimal location is near a window. Windows facing Colorado provide the best signal. The WWVB time signal will easily penetrate Masonry and wood framed buildings. WWVB will penetrate almost every residential building and most steel buildings if they have adequate windows. It is not possible, however, for WWVB to penetrate most indoor shopping malls and rooms in the center of large office buildings that do not have windows. In buildings that WWVB cannot penetrate you may set the time using the manual time set button.  When the clock is exposed to the WWVB signal it will automatically set the hands to the exact time.  *IMPORTANT NOTE:  Only use the Manual Setting Option if, after a few days, you are absolutely unable to receive a WWVB signal.  Skyscan clocks do not receive or process radio-controlled time signals from Germany's DCF 77, Japan's J Ga AS, or England's MSFs atomically regulated transmitters. Skyscan clocks can be manually set and used anywhere.  MANUAL TIME SET OPTION ·          Press and hold the TIME SET BUTTON on the back of the movement continuously to set the manual time. Your clock is now working as a quartz clock and not searching for the WWVB signal. It is important to not release the button for more than 2 seconds during this time, or your clock will automatically return to the RADIO CONTROL MODE to begin searching for a WWVB signal again.  ·          If at any time your clock automatically advances to 4:00, 8:00, or 12:00, it has entered the RADIO CONTROLLED MODE and is searching for the WWVB signal.·          If you are trying to manually set your clock and have accidentally returned to the RADIO CONTROL MODE, you must remove the batteries, wait 2 minutes, and then reinstall the battery.  The clock will advance to 4, 8, or 12 and allow you to use the MANUAL SET BUTTON.  ·          There are 2 ways to return to RADIO CONTROL MODE if your clock is manually set:1.        Remove the battery, reinstall it after 2 minutes, and start the clock again.2.        Press the MANUAL SET BUTTON for more than 3 seconds.  The hands will move to the 4:00, 8:00, or 12:00 o'clock position and begin searching for a WWVB signal.Ø         After successful WWVB signal is established, your clock will be set automatically and will work as a radio controlled clock.Ø         If reception of WWVB signal is not possible, your clock will switch back to the QUARTZ MODE after 10 minutes and show the quartz time.  This movement is now functioning as a quartz clock and will not attempt to receive the WWVB signal again, unless you remove the batteries or press the TIME SET BUTTON again as described above.·           It is not possible to manually set the time if your clock has automatically set itself. For more information on the NIST and radio controlled time, see http://www.boulder.nist.gov/timefreq/ 

Troubleshooting

The wonderful advantage of owning a Skyscan radio controlled clock is that it is virtually trouble free. If the clock receives a clear signal it will set itself perfectly. If it does not receive a signal consider the following:  Battery -                   The Skyscan clock should have a fresh Alkaline Battery to best receive and process the time signal. Location -                 Try a different location, ideally near a window. It should be at least six feet from computers, TVs, air conditioners, other Radio Controlled clocks and other electrical appliances that cause interference. Weather -                  Electrical storms between you and Colorado during the night will interfere with the WWVB signal. Although we cannot control the weather we can help you predict it.  

Daylight Saving Time

The National Institute of Standards and Technology and WWVB encode a special DST "bit" in the WWVB transmission for DST. Your Skyscan clock will read this information and automatically advance the hands one hour in the spring and eleven hours in the fall. If Congress changes the Daylight Saving Time dates, your Skyscan clock will automatically set itself to the correct time on the newly designated dates.Arizona and Indiana If you live in an area that does not recognize DST you must press the (unmarked) DST button for one second to deactivate your clock's DST program. To reactivate the DST program simply press the DST button again for one second.Positioning the Analog Clock:Before wall mounting, please check that the WWVB signal can be received from the desired location. To wall mounting:1.              Fix a screw (not supplied) into the desired wall, leaving the head extended out by about 3/16" (5mm).2.              Hang the Analog clock onto the screw. Please remember to ensure it locked on the place before releasing. 

Frequently Asked Questions

 Q. How long will the battery last? A. A good AA alkaline battery will last over one year. If your clock is located in an area with little interference where it can quickly receive a signal the battery can last much longer than one year.  Q. Can the clock be wired to control timing circuits? A. No.  Q. Why does the second hand move only once every 2 seconds? A. When the battery drops below 1.25 volts the clock indicates that it is time to change the battery by advancing the second hand in 2-second steps. The operating voltage range is 1.25 to 1.75 volts.  Care and Maintenance:·                Extreme temperatures, vibration and shock should be avoided as these may cause damage to the units and give inaccurate forecasts and readings.·                When cleaning, use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the casing.·                Do not submerge the unit in water.·                Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of the recommended size.·                Do not make any attempts to repair the unit. Return it to its original point of purchase for repair by a qualified engineer. Opening and tampering with the unit may invalidate its guarantee.·                Do not expose the unit to extreme and sudden temperature changes, as this may lead to rapid changes in forecasts and readings and thereby reduce its accuracy. WARRANTY: This product is warranted to be free of defects in manufacturing for 1 year after purchase. Defective clocks should be returned to the place of retail purchase. Batteries change:For best performance, batteries should be replaced at least once a year to maintain the best running accuracy. Ensure that the batteries used are new and the correct size.  Please help in the preservation of the environment and return used batteries to an authorized depot.  Equity Industries Corp.5721 Bayside RoadVirginia Beach, VA 23455 For Customer Inquiries:
Web: www.skyscaninfo.com
Email: shelley@eic.hrcoxmail.com This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
Tel: (757) 460-2483                        Model 28700                                                                                       Printed in China 2006